• Usually Ships 4 to 7 Business Days
Micanan

Micanan PRO-J5011 Jackshaft: 1/2 HP 115V 1PH

SKU:
PRO-J5011
  • Usually Ships 4 to 7 Business Days
availability:
available
MSRP: $1,118.68
$1,016.98
(You save $101.70 )
Adding to cart… The item has been added

Micanan Commercial Garage Door Opener PRO-J

COMMERCIAL / INDUSTRIAL CONTINUOUS DUTY BELT DRIVE JACKSHAFT

Designed for use on commercial / industrial sectional doors with high or vertical lift track and small rolling grilles

Product Highlights:
  • Part Number: PRO-J
  • Continuous duty 1725 rpm industrial/commercial belt drive jackshaft operator
  • Designed for commercial high lift, vertical lift, rolling doors and rolling grilles driven by a drive shaft
  • Built-in overload protection 93-phase) or separate full overload protection (1-phase)
  • On board receiver with antenna
  • External radio control terminal strip
  • Low friction powder metal limit cam nuts with fully adjustable rotary limit switches
  • Three button open-close stop control station Nema-1 rated
  • Motor removable without affecting limit settings
  • 1/3, ½, ¾ or 1 horsepower
  • Voltage: 115V 1-phase, 230V 1-phase, 230V 3-phase, 460V 3-phase, 575V 3-phase
  • Output shaft speed is 36 RPM
  • Maximum of 15 complete cycles per hour
  • Primary reduction: (5L) V-belt and pulleys (2” to 8” diameter) Secondary reduction: #41 chain and sprockets
  • #41 roller chain & sprockets on all internal drives
  • #50 roller chain and sprockets on final drive
  • Baked on dark grey coat finish
  • 3/4” permanently lubricated & 1” permanently lubricated & sealed ball bearings on final drive shaft
  • Chain keeper
  • Left or right hand mounting
  • Mechanical brake system
  • Solenoid actuated drum and brake shoe braking system to prevent coasting and maintain door position
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • C-2 wiring constant pressure on close, momentary contact on open and stop
  • Wired to accept reversing edge, radio control, photocells, loops and OPEN/CLOSE devices
  • 24VAC control circuit to protect against short circuit, supplies power to drive control relays with 15VA power available for external devices
  • 4 micro limit switches that control door travel activated by fully adjustable screw type cams
  • Floor level cable disconnect system with electrical cut-out feature for manual operation of the door by hand in the event of an emergency
  • Adjustable friction clutch to minimize damage to door operator, door or vehicles
  • Two-year warranty
  • Shipping weight: 95 lbs.
  • N-1 Micanan photocells included for doors up to 24’ wide
Carton Contents:
  • 1 x OPEN/CLOSE/STOP 3-button control station
  • 1 x #50 Drive chain package: 4’ (1.2m) c/w #50 connecting link
  • 1 x Drive Sprocket 50B12 x 1” c/w 2 set screws and ¼” x 1-1/4” keyway
  • 1 x Door Sprocket 50B18 x 1” c/w 2 set screws and ¼” x 1-1/4” keyway (sprocket size and bore may vary according to door size and type, shaft size and drum diameter
  • 1 x Chain keeper
  • 1 x Keyring
  • 3/8” bolt, hex nut, lock washer and flat washer
  • 1 x pocket wheel hand chain (Model PRO-H) (2 x door height less 4’ (1.2m))
  • 1 x Set of Warning signs