10SSTI48 SuperScan I Active Infrared Presence Sensor by BEA

Get the SuperScan I 10SSTI48 active infrared presence sensor by BEA from North Shore Commercial Door. The SuperScan I 10SSTI48 is a door mounted presence detection sensor that uses triangulation to detect pedestrians. This technology eliminates false detection caused by varying floor and environment conditions. The SuperScan I 10SSTI48 is intended for use with automatic swinging, revolving, folding and low energy doors. The SuperScan I 10SSTI48 can be used as an individual unit or with up to 9 slave modules in a daisy chain. Due to this flexibility, the SuperScan I 10SSTI48 to be used on narrow or wide doors. Independently angle each module detection zone to eliminate unwanted detection of guide rails or walls. Coupled with BEA's Bodyguard overhead presence sensor, the SuperScan I 10SSTI48 meets ANSI 156.10 standard relating to swing doors. Suggested use for 50" door leaf.

The SuperScan I 10SSI48 Includes: 1 Master module per housing. Overall length is 48 in. end cap to end cap.

Product Highlights:

• Product Number: 10SSTI48
• Door mounted presence detector
• Active infrared
• For use with swinging, revolving, low energy, high performance and off doors
• Master with up to 8 slaves monitored or up to 9 slaves non-monitored
• Field cut housing to desired door widths
• When coupled with BEA's Bodyguard overhead sensor, SuperScan meets ANSI 156.10 standard for swing doors
• Relay hold time can be adjusted from .1 to 4.5 seconds
• Unit can be set to background analysis mode to reduce the chance of non-detection from faulty environment situations
• Suggested use for 50" door leaf

Technical Information:

• Technology: Focused Active Infrared

• Detection Mode: Presence

• Measurement of Distance: Triangulation

• Supply Voltage: 12 to 24 VAC ± 10% / 12 to 24 VDC + 10%

• Detection Range: 0 in. to 96 in. (0 ft. to 8 ft.)

• Detection Signal Duration: Infinite Presence Detection

• Output: Single Relay
  • Maximum Contact Rating: 1 A @ 30 V (resistive)
  • Hold Time: 0.1 to 4.5 Seconds

• LED Indications:
  • Master: Red LED = Detection
  • Green LED = Active Output
  • Slave: Red LED = Detection

• Operating Temperature Range: -30˚ F to 140˚ F

• PCB Dimensions:
  • Master: 10.91 in x 1.5 in
  • Slave: 8.75 in x 1.5 in

• Max. Number of Slaves:
  • Standard: 9
  • With Monitoring: 8 max.

• Function Selections:
  • Detection Mode - NO or NC
  • Normal Mode or Background Analysis Mode

• Response Time: < 50 ms

• Material: Aluminum, ABS plastic / acrylic

• Housing Color: Black

• Degree of Protection: IP54