BEA
Micro-Processed Lock-Out Relay Module for Stanley Microprocessor Control Box 10LO21S by BEA
This item is discontinued. Please view this replacement item:
The 10LO21S Lock-Out Module by BEA is ready to ship from North Shore Commercial Door. The 10LO21S is a lockout relay module that provides a means of interfacing the SuperScan directly with the Sentrex logic control on the Stanley Microprocessor Control Box. When the Sentrex logic control is set to stall logic, the control will not be able to determine if the detection is due to the SuperScan or the Bodyguard/DK12 overhead presence sensors. The 10LO21S has been designed to process the information it is given from the Bodyguard/DK12. The 10LO21S has two inputs and two outputs. The two inputs are for the Bodyguard/DK12 signal and the motor signal. The outputs are for the safety relay and the activation relay. The 10LO21S is not intended for use with systems requiring safety beams.
Product Highlights:
- Item Number: 10LO21S
- Micro-processed lockout relay module
- Provides a means of interfacing the SuperScan directly with the Sentrex logic control on the Stanley Microprocessor Control Box
- When the Sentrex logic control is set to stall logic, the control will not be able to determine if the detection is due to the SuperScan or the Bodyguard/DK12 overhead presence sensors
- Designed to process the information it is given from the Bodyguard/DK12
- Two inputs and two outputs
- Inputs are for the Bodyguard/DK12 signal and the motor signal
- Outputs are for the safety relay and the activation relay
- Not intended for use with systems requiring safety beams
Technical Information:
- Power Supply: 12-24 Volts AC / 15-24 Volts DC
- Operating Frequency: 4 MHz (Microprocessor)
- Power Consumption: 10 mA at rest, 50 mA Max.
- Output: 2 x SPST Relays
- Max. Voltage - Relay Contact: 60V DC, 120V AC
- Max. Current - Relay Contacts (both): 2A DC, 0.5A AC
