Infrared Presence Detection Sensor IXIO-ST by BEA 10IXIOST

North Shore Commercial Door now carries the IXIO-ST Presence Sensor for Automatic Sliding Doors by BEA. The IXIO-ST is an effective, versatile and easy-to-use safety sensor for automatic sliding doors. It can be used for both clear door openings and side-lite protection. Visible alignment beams and infrared curtains make the IXIO-ST easy to set up and adjust. On-board LCD screen streamlines the installation and setup processes. The IXIO-ST can be adjusted into an ANSI compliant solution and has earned a comprehensive list of credentials and certifications, including UL, FCC and IP54. 

The IXIO-ST provides side-lite protection to reduce liability. Precise protection is achieved with two 24-spot, high-density, infrared safety curtains. IR curtain adjustments are easy with four visible red alignment spots projected on the ground. Programming and troubleshooting with an intelligent, menu-driven LCD screen. System integration, sensor performance monitoring and data analysis optimization performed by an on-board microprocessor. Fully monitored internally, capable of external monitoring.

Product Highlights:

• Item Number: 10IXIOST
• Presence sensor for automatic sliding doors
• Can be used for both clear door openings and side-lite protection to reduce liability
• Easy to set up and adjust with visible alignment beams and infrared curtains
• On-board LCD screen streamlines the installation and setup processes
• Programming and troubleshooting with an intelligent, menu-driven LCD screen 
• Can be adjusted into an ANSI compliant solution
• Comprehensive list of credentials and certifications including UL, FCC and IP54
• Precise protection achieved with two 24-spot, high-density, infrared safety curtains
• IR curtain adjustments are easy with four visible red alignment spots projected on the ground
• System integration, sensor performance monitoring and data analysis optimization performed by an on-board microprocessor
• Fully monitored internally, capable of external monitoring

Technical Information:

• Technology: Active Infrared

• Detection Mode: Presence

• Spot Size: 2 in x 2 in

• Max. Number of Spots: 24 per curtain

• Max. Number of Curtains: 2

• Output Relays:
  • Electro-Mechanical-Relay (Potential and Polarity Free)
    • Maximum Contact Current: 1 A
    • Maximum Contact Voltage: 30 VDC
    • Hold Time: 0.5 to 9 s
  • Solid-State-Relay (Potential and Polarity Free)
    • Maximum Contact Current: 400 mA
    • Maximum Contact Voltage: 42 VDC

• Hold Time: 0.3 to 1 s

• Test Input:
  • Electro-Mechanical-Relay (Potential and Polarity Free)
    • N/A
  • Solid-State-Relay (Potential and Polarity Free)
    • Sensitivity: Low:<1 V; High:>10 V (max. 30V)
    • Response Time on Test Request: typical:<5ms

• Supply Voltage: 12 - 24 VAC ± 10%; 12 - 30 VDC ± 10% (to be operated from SELV compatible power supplies only)

• Power Consumption: < 2.5 W

• Mounting Height: 78 in - 138 in (6.5 ft - 11.5 ft)

• Temperature Range:
  • -13˚F to +131˚F
  • 0 - 95% relative humidity, non-condensing

• Degree of Protection: IP54

• Applicable Directives:
  • R&TTE 19999/5/EC
  • EMC 2004/108/EC
  • MD 2006/42/EC
  • RoHS 2002/95/EC

• Dimensions (D x W x H): 2.25 in x 10.6 in x 2.27 in

• Cable Length: 120 in (10 ft)

• Norm Conformance: 
  • EN 12978, EN ISO 13849-1:2008 PL <<c>> CAT.2 (under the condition that the door control system monitors the sensor at least once per door cycle)
  • IEC 61496-1:2012 ESPE Type 2
  • EN 16005: 2012 Chapter 4.6.8;
  • DIN 18650-1:2010 Chapter 5.7.4
  • BS 7036-1:1996 Chapter 8.1