• Usually Ships 4 to 7 Business Days
BEA

BEA Quadscan II Active Infrared Safety Sensor 10QUADSCANII

SKU:
10QUADSCANII
  • Usually Ships 4 to 7 Business Days
availability:
available
MSRP: $436.84
$397.13
(You save $39.71 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

BEA's Quadscan II from North Shore Commercial Door is a door mounted active infrared safety sensor for use with pedestrian automatic swinging doors. The 10QUADSCANII presence detection sensor is externally monitored*. The Quadscan II has an adjustable mounting height from 43 to 118 inches. Four AIR safety spots provide approximately 16 inches of safety protection width per sensor at 78 inches mounting height. The Quadscan II has independent safety side and approach side output relays. User friendly adjustments with four DIP switches for the door side, AIR frequency, background reflectivity and uncovered zone height.

10QUADSCANII is easy to install and setup without a remote control. The Quadscan II meets ANSI standard for swing door standalone door-mounted safety. Wiring is easy with master/slave configuration. Universal module for both leading edge and hinge side protection. External* monitoring provides improved safety.

The Quadscan II/10QUADSCANII includes 2 Modules: 34.5 in. end cap to end cap

Product Highlights:

  • Product Number: 10QUADSCANII
  • Door mounted presence detector
  • Active infrared
  • Standalone safety sensor
  • External monitoring* for improved system safety
  • For use with pedestrian automatic swinging doors
  • Adjustable mounting height from 43 in. to 118 in.
  • Independent relays for approach and safety side
  • Four DIP switches for user friendly adjustments
  • Master/slave configuration for easy wiring
  • Easy installation and set up without the need for a remote control
  • Universal module for both leading edge and hinge side protection
  • Meets ANSI standard for swing door standalone door-mounted safety

Technical Information:

  • Technology: Active infrared with background suppression
  • Detection Field: 15 3/4 in. (W) x 2 3/4 in. (D) (at 6 1/2 ft. mounting height; 4 spots active)
  • Mounting Height: 3 ft. 7 in. (1.1m) to 9 ft. 10 in. (3m)
  • Range Adjustment: Mechanical range adjustment screw
  • Reaction Time: 64 ms (typ)
  • Supply Voltage: 12 V - 24 V AC +/-10% ; 12 V - 30 V DC -5%/+10%
  • Max Current Consumption: 65 mA @ 24 V AC/75 mA @ 24 V DC (EACH MODULE)
  • Output: 2 relays (free of potential contact)
    • Max. Contact Voltage: 42 V AC/DC
    • Max. Contact Current: 1 A (resistive)
    • Max. Switching Power: 30 W (DC) / 60 VA (AC)
  • Input: 1 optocoupler (free of potential contact)
    • Max. Contact Voltage: 30 V
    • Voltage Threshold:
      • high: >10 V DC
      • low: <1 V DC)
  • Max. Number of Modules: 4 (up to 6 if 24 V DC)
  • Reflectivity: min 5% at IR-wavelength of 850 nm
  • Degree of Protection: IP53
  • Temperature Range: -13˚F to + 131˚F (-25˚C to +55˚C); 0-95% relative humidity, non-condensing
  • Norm Conformity:
    • EMC 2004/108/EC; MD 2006/42/EN
    • EN ISO 13849-1:2008 Performance Level <<c>> CAT 2; EN 12978

Door Compatibility:

  • Swinging
  •  Revolving
  •  Low Energy

*External monitoring requires a monitoring capable door control

QUADSCAN-SHEET.pdf

QUADSCAN-MANUAL.pdf