- Usually Ships 4 to 7 Business Days
DoorKing
DoorKing Inc. 1175-380 Commercial Vehicular Overhead AC Gate / Door Operator
- Usually Ships 4 to 7 Business Days
- availability:
- available
Available from North Shore Commercial Door, the DoorKing 1175 is perfect for serving gated communities, apartment complexes, commercial buildings, and industrial sites. It is not designed for residential applications and should never be used to operate overhead sectional garage doors. The DKS 1175 overhead gate operator is designed to operate overhead-type vehicular gates mounted on jamb tracks or jamb-type hardware. Overhead gates are typically used in underground parking applications where headroom is minimal. The low profile design and quiet operation make it ideal for these applications. An optional cover is available.
North Shore Commercial Door prides itself on quality customer service and providing the best and most complete product information to its customers. Contact us at 800-783-6112, or email support@northshorecommercialdoor.com with any questions. PRODUCT HIGHLIGHTS:
Item Number: 1175-380
Vehicular Overhead AC Operator by DoorKing Inc.
For gates/doors up to 14 feet tall and 25 feet wide
Direct-driven limit nuts
Gate tracker reporting output
Ports for plug-in loop detectors
Fail-secure, keyed quick release
Shock mounts
Heavy-duty 3-inch rails
Programming switches
Built-in power On/Off switch
1/2 HP 115 Volt
Requires rail assembly
Cover NOT included
SPECIFICATIONS:
For the Model 1175 with circuit board 4405-018 Rev A or higher ONLY.
Class of Operation: Model 1175 - UL325 Class ii, iii and iv
Type of Opening: Vehicular high-traffic gate/door only. Horsepower / Voltage / Phase: 1/2 HP - 115 VAC - 60 Hz. Single-Phase
Current: 5.4 Amps
Maximum Gate height/Door Dimensions: 14 Feet, Width - 25 Feet
Gear Reduction: 40:1 Worm gear in a continuous oil bath. Chain Type: #40
Cycles Per Hour: Continuous Duty
Speed: Approximately 10 inches per second
Inherent Entrapment Protection Device: Inherent Reverse Sensor System (Type A)
External Entrapment Protection Device Inputs (Monitored Inputs): Monitored connection inputs for Non-contact Sensor - Photo Sensor (Type B1) and Monitored connection input for Contact Sensor - Reversing Edge (Type B2)
Be sure to read our PDF below for the operator’s safety standards regarding slide gate and swing gate operators for your maximum security and protection. Our handy PDF goes through the installation and compatible keypads, maximum transformer power, high voltage, warning signs for troubleshooting, and more! You do not want want to miss this critical information!
