DoorKing Inc. 9240-380 208V Vehicular Slide Gate Operator

The DoorKing 9240-380 vehicular slide gate operator is designed for Class III and Class IV applications and is available at North Shore Commercial Door. It can be installed on gates up to 8,000 pounds in weight. Order this 3-horsepower high-security industrial/commercial gate operator for gates 25 feet to 100 feet in length. During any power outage, a fail-secure system requires manual operation to open the gate. An adjustable mid-stop control and anti-tailgating circuit help prevent unauthorized entries.

This operator lets you adjust gate speeds up to two feet per second. It also has selectable loop functions for stop/reverse and ports for plug-in loop detectors that can be wired at the front, rear, or center of your gate. Please note that you will need an optional pedestal mounting base to center-mount this DoorKing 208-volt gate controller.

North Shore Commercial Door prides itself on quality customer service and providing the best and most complete product information to its customers. Contact us at 800-783-6112, or email support@northshorecommercialdoor.com with any questions.

Product Highlights:

• 9240-380
• For gate lengths: 25 ft. - 100 ft.
• Maximum gate weight: 8,000 lbs.
• Anti-tailgating, mid-stop controls for maximum security
• Use only for Class III, Class IV industrial/commercial operations
• Manual operation only during any power outage
• Mount center, left, or rear (center mounting requires optional pedestal)
• 3 HP, 208V
• Adjustable speed controls: 1/2 ft./sec. - 2 ft./sec.
•  Ports for plug-in loop detector, select loop functions for stop or reverse
• Direct-drive limit switches for precise gate control
• 2 convenience outlets
• Built-in on/off power, reset switches