EMX LRS-FP-100 Sensor - Flat Pack with 100ft Lead (LRS-FP-100)

Automate your gate with the EMX Flat Pack Direct Burial Sensor by EMX from North Shore Commercial Door. EMX Flat Pack LRS-FP-100 is a magnetoresistive direct burial sensor with a 100' lead wire that stores ambient background and settings in a non-volatile memory. Engineered for direct use with EMX Single Cut Magnetoresistive Vehicle Detector Control Unit LRS-C1 (Formerly known as the CarSense CS303-C-1)

The EMX Flat Pack LRS-FP-100 sensor measures Earth's magnetic field and responds to disturbances caused by ferrous objects. Three sensing elements provide magnetic field measurement in the X, Y and Z axis, improving detection sensitivity. Stand-alone sensor with solid state output. Fast response for high-speed detection. The sensor is designed to be selective to help reduce false triggers. Detect-On-Stop (DOS) feature will allow detection only when a vehicle has come to a complete stop on the sensor. This is a worldwide unique feature to EMX sensors. It is a major advantage if you want to ignore cross traffic in tight spaces.

In contrast to the multiple cuts and corner reliefs required for the installation of inductive loops, the small size of the Flat Pack detector allows for easy installation in the pavement (below grade) with straight saw cut resulting in cost savings on labor and materials.

The EMX Flat Pack LRS-FP-100 unit was formerly known as the CS303-FP-100 and works with CarSense magnetoresistive Vehicle Detector products by EMX.

Applications

• Boom Gate Control
• Drive-Thru & Car Wash Vehicle Detection
• Truck/Lorry Detection at Loading Docks
• Vehicle Counting in Car Park and Toll Booths
• Truck and tow-motor detection for industrial gates and doors

The LRS-FP-100 sensor provides up to a 5ft sensing range in all directions. Once the sensor(s) has been programmed using theLRS-C1 Control Unit, the Sensor(s) stores the settings and operates independent of the Control Unit and can be connected to the LRS-LC Logic Interface. The LRS-LC Logic Interface allows two (2) sensors to be connected with one output to extend the detection area to 5 x 10ft.

***Important Note***

• The EMX Flat Pack Sensor is for direct burial only and not for installation above ground like the EMX Direct Burial Sensor, (LRS-DB-50/LRS-DB-100), that can be buried below ground or installed above ground (i.e. next to a building).

• The sensors have identical electronic boards but the electronics are contained in a different housing.

• The Flat Pack is meant to be inserted into a cut in the pavement (concrete or asphalt) and sealed with epoxy. It is not meant to be exposed to the elements.

• The electronics of the LRS-DB-100 are sealed with epoxy and can be mounted anywhere.

• This item includes the burial sensor only with 100' lead wire. Other components sold separately.

Product Highlights

• Item Number: LRS-FP-100
• Flat Pack Direct Burial Sensor by EMX
• Formerly known as the CarSense CS303-DB-100
• Magnetoresistive direct burial sensor w/100' lead wire
• Stores ambient background and settings in a non-volatile memory
• Single cut installation
• Sensor measures Earth's magnetic field
• Responds to disturbances caused by ferrous objects
• Three sensing elements provide magnetic field measurement in the X, Y and Z axis for improved detection sensitivity
• Stand-alone sensor with solid state output
• Fast response for high-speed detection
• Designed to be selective to help reduce false triggers
• Detect-On-Stop (DOS) feature will allow detection only when a vehicle has come to a complete stop on the sensor
• This is a worldwide unique feature to EMX sensor and major advantage if you want to ignore cross traffic in tight spaces
• In contrast to the multiple cuts and corner reliefs required for the installation of inductive loops, the small size of the detector allows for easy installation in the pavement (below grade) with straight saw cut resulting in cost savings on labor and materials

Technical Information

• Outputs: NPN (Open Collector)

• Output Ratings: 50 mA

• Housing: Polyolefin

• Environmental Rating: IP69K

• Power Supply: 12-30 VDC

• Current Draw: 10 mA max

• Dimensions:3.0" (80mm) x 0.8" (20mm) x 0.35" (9mm)

• Weight: 0.05lbs (23g)

Loopless Magnetoresistive Vehicle Detector

Model	Operating Range	Output	Power	Channel	Housing	Rating	Connection	Detect-on-Stop™	ULTRAMETER™ Sensitivity Display	Installation	Detection Material	Mounting	Detection Mode	Features
Control Unit (required to program sensors)
LRS-C1	—	Relay and discrete	12-30 VDC 24 VAC	Single	ABS	IP30	11 position screw terminal	Yes	Yes	In operator	—	Above ground	Presence and motion	Pulse on entry/exit
Sensor Options
LRS-FP	5 ft. radius (1.5m) 10 ft. dia. (3m)	Discrete	12-30 VDC	Single	Polyamide	IP69K	5 wire	Yes	—	Single saw cut	Ferrous metal	Below ground	Presence and motion	Retains programmed settings
LRS-DB	5 ft. radius (1.5m) 10 ft. dia. (3m)	Discrete	12-30 VDC	Single	PVC	IP69K	5 wire	Yes	—	Core drill, Clamp	Ferrous metal	Above or Below ground	Presence and motion	Retains programmed settings
Accessory Unit
LRS-LC	20 ft. (6m) or more with use of multiple FP or DB	Dual relay	12-30 VDC 24 VAC	Dual	ABS	IP30	11-pin	Yes	—	In operator	—	Above ground	Presence and motion	Provides extended detection, A/B logic and more