• Usually Ships 4 to 7 Business Days
EMX

EMX LRS-FP-50 Sensor - Flat Pack with 50ft Lead (LRS-FP-50)

SKU:
LRS-FP-50
  • Usually Ships 4 to 7 Business Days
availability:
available
MSRP: $183.34
$166.67
(You save $16.67 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

The EMX Flat Pack Direct Burial Sensor is now available to ship from North Shore Commercial Door. EMX Flat Pack LRS-FP-50 is a magnetoresistive direct burial sensor with a 50' lead wire that stores ambient background and settings in a non-volatile memory. Engineered for direct use with EMX LRS Single Cut Installation Vehicle Detector Control Unit LRS-C1.

The EMX Flat Pack LRS-FP-50 sensor measures Earth's magnetic field and responds to disturbances caused by ferrous objects. Three sensing elements provide magnetic field measurement in the X, Y and Z axis, improving detection sensitivity. Stand-alone sensor with solid state output. Fast response for high-speed detection. The sensor is designed to be selective to help reduce false triggers. Detect-On-Stop (DOS) feature will allow detection only when a vehicle has come to a complete stop on the sensor. This is a worldwide unique feature to EMX sensors. It is a major advantage if you want to ignore cross traffic in tight spaces.

In contrast to the multiple cuts and corner reliefs required for the installation of inductive loops, the small size of the Flat Pack detector allows for easy installation in the pavement (below grade) with straight saw cut resulting in cost savings on labor and materials.

The EMX Flat Pack LRS-FP-50 unit was formerly known as the CS303-FP-50 and works with CarSense magnetoresistive Vehicle Detector products by EMX.

Applications

  • Boom Gate Control
  • Drive-Thru and Car Wash Vehicle Detection
  • Truck/Lorry Detection at Loading Docks
  • Vehicle Counting in Car Park and Toll Booths
  • Truck and tow-motor detection for industrial gates and doors

The LRS-FP-50 sensor provides up to a 5ft sensing range in all directions. Once the sensor(s) has been programmed using the LRS-C1 Control Unit, the Sensor(s) stores the settings and operates independent of the Control Unit and can be connected to the LRS-LC Logic Interface. The LRS-LC Logic Interface allows two (2) sensors to be connected with one output to extend the detection area to 5 x 10ft.

***Important Note***

  • The EMX Flat Pack Sensor is for direct burial only and not for installation above ground like the EMX Direct Burial Sensor (LRS-DB-50/LRS-DB-100), that can be buried below ground or installed above ground (i.e. next to a building).
  • The sensors have identical electronic boards but the electronics are contained in a different housing.
  • The Flat Pack is meant to be inserted into a cut in the pavement (concrete or asphalt) and sealed with epoxy. It is not meant to be exposed to the elements.
  • The electronics of the LRS-DB-50/LRS-DB-100 are sealed with epoxy and can be mounted anywhere.
  • This item includes the burial sensor only with 50' lead wire. Other components sold separately.

Product Highlights

  • Item Number: LRS-FP-50
  • Flat Pack Direct Burial Sensor by EMX
  • Formerly known as the CarSense CS303-C-1
  • Magnetoresistive direct burial sensor w/50' lead wire
  • Stores ambient background and settings in a non-volatile memory
  • Single cut installation
  • Sensor measures Earth's magnetic field
  • Responds to disturbances caused by ferrous objects
  • Three sensing elements provide magnetic field measurement in the X, Y and Z axis for improved detection sensitivity
  • Stand-alone sensor with solid state output
  • Fast response for high-speed detection
  • Designed to be selective to help reduce false triggers
  • Detect-On-Stop (DOS) feature will allow detection only when a vehicle has come to a complete stop on the sensor
  • This is a worldwide unique feature to EMX sensor and major advantage if you want to ignore cross traffic in tight spaces
  • In contrast to the multiple cuts and corner reliefs required for the installation of inductive loops, the small size of the detector allows for easy installation in the pavement (below grade) with straight saw cut resulting in cost savings on labor and materials
  • Engineered for direct use with EMX LRS Vehicle Detector Control Unit LRS-C1

Technical Information

  • Outputs: NPN (Open Collector)
  • Output Ratings: 50 mA
  • Housing: Polyolefin
  • Environmental Rating: IP69K
  • Power Supply: 12-30 VDC
  • Current Draw: 10 mA max
  • Dimensions: 3.0" (80mm) x 0.8" (20mm) x 0.35" (9mm)
  • Weight: 0.05lbs (23g)

lrs-2.pdf

lrs.pdf