EMX VMD202-100 Vehicle Motion Detector 100' (VMD202-100)

The most advanced single-piece vehicle motion sensor on the market with a 100-foot lead is available at North Shore Commercial Door at a low price. The EMX VMD202-100 vehicle motion detector has its probe and its electronics housed in a slim design that allows the device to be buried next to a driveway. The maximum sensitivity setting provides a 12-foot detection range dependent on the size and speed of the vehicle. A wide range of power inputs can be accepted by this device and you can install a 9V battery in the device for six months of operation if the vehicle motion detector is located in an area without a power supply. This device also has a low standby current of 250uA for solar power applications.

Product Highlights:

• 100-foot probe assembly and wire are water-tight and direct burial compatible
• The harness is pre-wired onto the lead wire for easy installation
• Settings are placed in non-volatile memory in case of power failure
• Accepts a wide range of power inputs from 9 41VDC or 6 29VAC
• Low current consumption of 250uA standby and 12mA activated

Vehicle Motion Detectors

Model	Output	Power	Channel	Housing	Connection	Detection Mode	Features
CS101	12 ft. (~4m) @ 5mph min. speed	Dual relay	9-41 VDC 6-29 VAC	Potentiometer - dial	11-pin	Control unit: polycarbonate Probe: PVC	Adjustable output time
CS202	12 ft. (~4m) @ 5mph min. speed	Relay	9-41 VDC 6-29 VAC	—	5 wire	PVC	Single piece detector
VMD202	12 ft. (~4m) @ 5mph min. speed	Relay	9-41 VDC 6-29 VAC	—	5 wire	Probe: PVC Optional Remote: polycarbonate	Single piece detector