- Usually Ships 4 to 7 Business Days
GTO
GTO R4222 PHOTOELECTRIC DUAL BEAM DETECTOR
- Usually Ships 4 to 7 Business Days
- availability:
- available
Keep your gate safe with the Photoelectric Dual Beam Detector/Gate Opener Photo Eyes by GTO/Mighty Mule from North Shore Commercial Door. The Mighty Mule Gate Opener Photo Eyes (Item #R4222) is a non-contact photoelectric safety device system utilizing dual beam and through-beam technology to reduce false detections when detecting obstructions.
GTO/Mighty Mule Gate Opener Photo Eyes prevent the gate from closing when an obstruction is in the path of the through-beams. When the beams detect the presence of a moving object, the detection will cause the gate(s) to stop and reverse to the fully open position. As long as the beam is obstructed the gate(s) will remain open. Not compatible with solar powered gate openers. For use with all GTO Access Systems and Mighty Mule AC and DC powered gate operators.
This safety feature is designed to be direct wired to the gate opener circuit board and easy to install on the inside and on the outside of your gate. For a typical pull-to-open application, two Photo Eyes are placed across the driveway opposite of one another, just outside the gate. Two more would be placed on the inside of the property but outside of the reach of the gate in its open position. These sensors do not allow the gate to close when it senses any obstruction (vehicle, person, horse, etc.) in the path of the beam. Low voltage wire and mounting posts not included. Backed by the Mighty Mule 12-month warranty.
WHAT'S INCLUDED
- Two (2) Photo Eyes
- All Basic Mounting Hardware
PRODUCT HIGHLIGHTS
- Item Number: R4222
- Photoelectric Dual Beam Detector/Gate Opener Photo Eyes by GTO/Mighty Mule
- Non-contact photoelectric safety device system
- Utilizes dual beam and through beam technology to reduce false detections when detecting obstructions
- Prevents the gate from closing when an obstruction is in the path of the the through-beams
- When the beams detect the presence of a moving object, the detection will cause the gate(s) to stop and reverse to the full open position
- As long as the beam is obstructed the gate(s) will remain open
- Not compatible with solar powered gate openers
- For use with all GTO Access Systems and Mighty Mule AC and DC powered gate operators
- Safety feature designed to be direct wired to the gate opener circuit board and easy to install on the inside and on the outside of the gate
- For a typical pull-to-open application, two Photo Eyes are placed across the driveway opposite of one another, just outside the gate
- Two more would be placed on the inside of the property but outside of the reach of the gate in its open position
- These sensors do not allow the gate to close when it senses any obstruction (vehicle, person, horse, etc.) in the path of the beam
- Low voltage wire and mounting posts not included
- Backed by the Mighty Mule 12-month warranty
TECHNICAL INFORMATION
- Detection Method: Infrared Photoelectric
- Range:
- Indoor: 98.4 ft (30m)
- Outdoor: 295.2 ft (90m)
- Beam Characteristics: Pulsed Infrared Dual Beams
- Response Time: 50~700msec (Selectable)
- Power Input: DC12.5~24V / AC11~18V
- Current Consumption: 40mA Max
- Output Pulse Duration: 2Sec (±1) Nominal
- Alarm Output: Form B Relay (AC/DC 30V 0.5A Max)
- Tamper Switch: N.O.
- Contact is open when cover is removed (transmitter and receiver)
- Operating Temperature: -13°F (-25° C)~131°F (55°C)
- Environment Humidity: 95% Max
- Alignment Angle: 20°±10° Vertical, ±90° Horizontal
- Mounting: Wall or Pole
- Weight: .66lbs (300g) Both Transmitter & Receiver
- Appearance: PC Resin (Black)