• Usually Ships 4 to 7 Business Days
GTO

PRO-SL2000B HD Sld Gate Oprtr Pkg w/Intrnl Lck for Sgl Gates 1,000 lbs/30 ft Lng w/20 ft Opng by GTO

SKU:
PRO-SL2000B
  • Usually Ships 4 to 7 Business Days
availability:
available
MSRP: $1,897.08
$1,724.62
(You save $172.46 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

North Shore Commercial Door has the PRO-SL2000B Series Heavy Duty Slide Gate Operator for Single Gate Use w/Internal Lock by GTO/Linear Pro Access. The PRO-SL2000B can handle gates up to a maximum of 30 ft. (9.1 m) AND 1000 lbs. (454 kg) with a 20 ft. opening (if all proper installation procedures have been followed).

FEATURES

  • Durable professional residential slide gate opener
  • Inherent battery backup
  • Chain disconnect for manual operation
  • Fully compatible accessory terminal block provides connections for safety loops, wands, intercoms, card readers, & phone systems
  • Operation, diagnostic and safety alarms
  • Inherent obstruction sensing
  • Light professional and residential cycle rated designed for up to 100 cycles daily
  • Soft start/soft stop - for long mechanical life expectancy
  • Auto close adjustable 3-120 seconds delay
  • Large 24 Ah battery and tray (2131H) with tray required for higher cycle or solar applications
  • Works on all types of gates; chain link, tube, panel, ornamental, wood, and vinyl
  • Full systems capable "add on ready" heavy-duty control board includes adjustable obstruction sensing, gate sequencing and auto close settings (0-120 seconds)
  • Includes a built-in internal friction disc brake/lock
  • Easy to install 4 ft. (1.2 m) post mounts

OPTIONAL FEATURES

  • Solar Power: Requires a 24-Amp hour battery (not included). 10-Watt Solar Panel Charger: float voltage 14.5 V DC output from a 14" (36 cm) x 12" (31 cm) silicon alloy panel. Generates a minimum of 10-Watts at 600 mA. A gated diode on the control board prevents battery discharge.
  • Pad Mount: Requires the Pad Mounting Plate (SGMP)
  • Dual Gates: For dual gate applications, add the Heavy Duty Second Operator Kit for Dual Gate Use PRO-SL2200B (sold separately)

TECHNICAL INFORMATION

  • Operating Temp: -5°F (-21°C) to +160°F (71°C)
  • Opening Time: 1 ft. (.31 m) per second
  • Chain: #41 32 ft. chain with master link
  • Battery: 12-Volt DC / 7.0-amp hour, sealed, rechargeable battery (included)
    • Battery charge is maintained by a 120V AC/60 Hz input and 18V AC at 40 VA. output, transformer rectified to 14V DC through the control board
  • Motor: 12-Volt (1/4 HP equivalent) DC motor, case hardened steel gear reducer
  • Control Board: Charging regulated circuit on control board
    • Sleep Draw: 40 mA
    • Active Draw: 2 to 9 amps
  • Dimensions: 18" (H) x 11" (D) x 21.5" (W)
  • Shipping Weight: 70 lbs. (32 kg) Meets UPS shipping standards
  • Safety Listings:
    • System certified to U.L. 325, 5th Edition safety standards
    • ETL Listed
  • Class of Operation: Class I, II, III, IV

WHAT'S INCLUDED

Access Ready Package Includes:

  • Battery Backup
  • Radio Receiver
  • Entry Transmitter
  • AC Transformer
  • All Necessary Hardware for Standard Post Mount Slide Gate Installation
  • 2-Year Warranty (Residential Application)

PRODUCT HIGHLIGHTS

  • Item Number: PRO-SL2000B
  • PRO-SL2000B Series Heavy Duty Slide Gate Operator for Single Gate Use w/Internal Lock by GTO/Linear Pro Access
  • For use with gates up to a maximum of 30 ft. (9.1 m) AND 1,000 lbs. (454 kg) with a 20 ft. opening (if all proper installation procedures have been followed)

PRO-SL2000B-SL2200B-BINDER.pdf