- Integrated, efficient design garage entryway transmitter accesses 4 doors at one and has dual-function to control operator (ceiling-unit) light as well
- Usually Ships Following Business Day
Hormann
Hormann HSM4-315 Garage Door Opener Mini transmitter remote control
- Integrated, efficient design garage entryway transmitter accesses 4 doors at one and has dual-function to control operator (ceiling-unit) light as well
- Usually Ships Following Business Day
- UPC:
- 42533350364
- availability:
- available
Control up to four separate garage doors with the touch of a button with the Hormann HSM4-315 Garage Door Opener Mini Transmitter Remote Control from North Shore Commercial Door. This handy Hormann garage door opener features a slim grey case with four rubber buttons arranged in a circular shape, making it easy to discern one door from the other. It also contains an internal battery cover for easy changing and a sun visor clip that enables users to clip the remote inside of any vehicle. While the buttons control up to four garage doors at a time, there is also an integrated radio receiver that enables you to control two different functions as well. Open, close and stop the garage door, or switch to the second channel to control the garage's opener light. This garage door opener works with any Hormann garage door setup.
Hormann HSM4-315 Garage Door Opener Mini Transmitter Instructions Programming for Channel 1 (door control):Press and release the “P” button (programming button) on the opener twice - the LED starts to flash (double flash).
Press the button you wish to use on the hand transmitter for at least 1 second. (Note: The distance between the transmitter and the radio receiver should be at least 3 ft.)
Once the programming has been completed, the LED on the opener starts flashing rapidly.
Release the button on the hand transmitter. Once the flashing stops, the integrated radio receiver is ready for operation. Test the function.
Deleting Radio Codes:
- Contains one 12-volt A23 battery
- Operates on a frequency of 315 MHz
- LED light on exterior
- Compatible with most vehicle operating systems
Hormann HSM4-315 Garage Door Opener Mini Transmitter Instructions Programming for Channel 1 (door control):
- Briefly press and release the “P” button (programming button) on the opener once - the LED starts to flash slowly.
- Press the button you wish to use on the hand transmitter for at least 1 second. (Note: The distance between the transmitter and the radio receiver should be at least 3 ft.)
- Once the programming has been completed, the LED on the opener starts flashing rapidly.
- Release the button on the hand transmitter. Once the flashing stops, the integrated radio receiver is ready for operation. Test the function.
- Press and hold the “P” button.
- The LED starts flashing slowly. Continue to hold the button until the LED flashes rapidly and then stops flashing and an audible signal sounds. All radio codes are now deleted.
