LiftMaster

LiftMaster SL595UL AC Heavy-Duty Industrial Slide Gate Operator

SKU:
SL595UL
MSRP: $3,922.91
$3,269.09
(You save $653.82 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

We have all model LiftMaster SL595UL Series industrial slide gate operators at North Shore Commercial Door. Open gates that are up to 90 ft. long or up to 2,500 lbs. in weight. Choose a 1-horsepower, 1.5-horsepower or 2-horsepower operator. Open gates at speeds of up to 12 in. per second. All SL595UL Series heavy-duty commercial sliding gate openers have galvanized steel frames and built-in adjustable friction clutches.

Each model has built-in MyQ technology to monitor your gate operator from anywhere, as well as built-in Security+ 2.0 technology with tri-band radio control signals. Each UL 325-compliant SL595UL operator is also compatible with HomeLink version 4.0 or higher in-vehicle wireless operator control systems.

Every operator has a high-starting torque continuous-duty motor rated at 25 cycles per hour, a mechanical limit system, 20:1 worm gear reducer and dual-voltage connections. Choose a 115/208/230 VAC single-phase (1PH) gate operator or 208/230/460/575 VAC three-phase (3PH) operator. Each gate operator model with solenoid-actuated brake system includes 25 feet of nickel-plated #50 chain. Each operator weighs 270 lbs.

Each model LiftMaster SL595UL Series operator includes a pre-motion warning alarm, external alarm reset button, LED diagnostic display and commercial gear-driven transmission. Every operator is protected by a lockable weatherproof NEMA 3R-rated powder-coated 7-gauge pre-galvanized steel enclosure.

Other safety features include quick-close and anti-tailgating sensors, reverse sensors and manual disconnect levers. Built-in surge protection shields the operator from damage caused by lightning strikes up to 50 ft. away. Although one LMRRUL monitored retro-reflective photo eye safety sensor is included, another photo eye must be ordered before operating the unit.

Choose a LiftMaster SL595UL Series SL595101UL (1HP, 120/208-240 VAC, 1PH) or SL595103UL (1HP, 208/240-460 VAC, 3PH) operator. We have LiftMaster SL595105UL (1HP, 575 VAC, 3PH), SL595151UL (1.5HP, 120/208-240V, 1PH), and SL595203UL (2HP 208/240-460V, 3PH) gate operators.

Or choose a LiftMaster SL595205UL (2HP, 575 VAC, 3PH) operator with a factory-installed operator heater ideal for use in sub-zero weather. Gate operator heaters are optional for other models. Maximum gate weights are 1,700 lbs. for a 1HP SL595UL Series operator, 2,100 lbs. for a 1.5HP operator and 2,500 lbs. for a 2HP gate operator.

SL595UL-SPEC-SHEET.pdf

LIFTMASTER-SL595UL-MANUAL.pdf