• Usually Ships Following Business Day
LiftMaster

Monitored Through Beam Photo Eyes LMTBU by LiftMaster

SKU:
LMTBU
  • Usually Ships Following Business Day
availability:
available
MSRP: $317.95
$289.05
(You save $28.90 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.
LiftMaster LMTBU Through-Beam Photo Eyes offered by North Shore Commercial Door are your solution for entrapment protection. This Transmitter/Reciever pair is UL 325-2016 compliant and NEMA rated 4X meaning the enclosure is protected against water, dirt, and corrosion. Anti-Fogging Lenses ensure the Photo Eyes will function in adverse conditions. Wireless network mode in dual-gate applications eliminates the need to wire between operators. Powerful sensing distance of up to 90ft. The LMTBU comes with a transmitter, a receiver, two stainless steel hoods, two powder-coated galvanized mounting brackets with hardware included, and six feet of cable. When assembled, the Photo-Eye and hood measure 4.9" H x 3" W x 3.7" D. Product Highlights:
  • Part Number: LMTBU
  • Sold as pair
  • Compatible with LiftMaster Gate operators with burgundy boards ONLY
  • Meets UL 325-2016 requirements
  • Provides motored entrapment protection solution
  • Sensing distance up to 90 feet
  • Anti-fogging lens and integrated diagnostics
  • LED indicators provide Instant feedback: aligned, misaligned, or blocked.
  • NEMA 4X Rated
  • Solar optimized, turns off when gate operator is idle
  • Requires low power only on one side of installation
  • LMTBU Emitter is not interchangeable with the LMRRU Emitter
TECHNICAL INFORMATION:
  • Temperature Range: -40ºF to 149ºF
  • Sensor Dimensions with Hood: (2) 4.9" H x 3" W x 3.7" D
  • Recieving Eye Dimensions with Hood: N/A
  • Cable Length: 6 ft.
  • Voltage: 6.8VDC
  • Current Draw: 30mA when operator is active, 0mA when idle
  • Monitoring Technology: Pulsed system
  • Interface: 2-wire connection
  • Solar: Optimized, turns off when operator is idle
  • Weight: 4.3Lbs
CARTON CONTENTS:
  • Transmitter
  • Receiver
  • Hood (2)
  • Sensor bracket (2)
  • M3 Screw (hood) (2)
  • Lock washer (2)
  • Retaining nut (2)
  • #8-18 Self-tapping screw (4)

LMRRU-Manual.pdf