• Usually Ships 4 to 7 Business Days
LiftMaster

LiftMaster L50LM Monitored Resistive Standard Edges

SKU:
L50LM
  • Usually Ships 4 to 7 Business Days
availability:
available
MSRP: $141.66 - $213.28
$128.78 - $193.89
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.
Safety is extremely important for any gate operator. When it comes to the most recent operators that are UL325 2016 rated, they can require anywhere from two up to eight forms of entrapment protection. A monitored safety edge is a perfect solution to this requirement. LiftMaster has come out with a large profile monitored safety edge that comes in three different lengths: 4 feet long (L504AL), 5 feet long (L505AL), and 6 feet long (L506AL). These sensing edges are perfect for LiftMaster’s swing and slide gate operators. The sensing edges are intended to be mounted on the vertical face of the gate. New UL325 2016 requirements include having an entrapment device in the open and closing travel directions. This means a safety device needs to be placed where the gate rests when closed as well as where its travel ends during operation. LiftMaster’s sensing edges can be hardwired into the operator, or be paired with the LMWEKITU Monitored Wireless Edge Kit. This kit comes with a receiver that wires directly into the operators control board, and a transmitter which installs on the gate near the edge. The build in lead wire from the edge will wire into the transmitter. When the safety edge meets an obstruction, the pressure sensitive device sends a signal to the operator or wireless edge kit that stops travel, and reverses the travel direction. Order today to get your gate operator back up and running! PRODUCT HIGHLIGHTS:
  • Part Numbers: L504AL, L505AL, and L506AL
  • Kit includes assembled safety edge, and aluminum channel
  • Monitored Safety edge for LiftMaster Swing and Slide Gates
  • Compatible with LiftMaster UL 325 2016 Compliant Operators Manufactured after 1/16 or with a Burgundy Board
  • Edge can be hardwired or wireless with use of LMWEKITU Monitored Wireless Edge Kit
  • Profile Dimensions: 1 Inch Wide X 1.8 Inches Tall
TECHNICAL SPECS:
  • OUTDOOR RATING: IP65
  • TEMPERATURE RANGE: -40ºF to 149ºF (-40ºC to 65ºC)
  • LENGTHS:4ft, 5ft, and 6ft
  • CABLE LENGTH: 39 Inches
  • ELECTRICAL DIAGRAM: 2-Wire N.O. Configuration
  • MATERIAL: TPE Rubber
  • ELECTRICAL CAPACITY: 24V 100mA

LiftMaster-Monitored-Resistive-Standard-Edges-Sell-Sheet.pdf

LIFTMASTER-S50-L50-MANUAL.pdf