• Usually Ships Following Business Day
Sommer

Sommer YS10249-00001 2060 PRO+ 3/4HP Operator

SKU:
YS10249-00001
  • Usually Ships Following Business Day
availability:
available
MSRP: $368.50
$335.00
(You save $33.50 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.
The SOMMER PRO+ 2060 Garage Door Operator from North Shore Commercial Door is a versatile garage door opener that uses a direct drive design offering a traveling motor that glides silently on a fixed chain. Direct drive operator technology maximizes strength while minimizing moving parts and operator noise and vibration. The 2060 PRO+ has a 600 Newton (3/4HP) Motor and can be used on doors with a maximum weight of 600 lbs. This operator uses a flexible separate control unit housing that can be installed virtually anywhere in a garage (front, rear, or ceiling). Pro+ models are ideal for installations with limited back room or where the building was not wired for a garage door operator ahead of time, since the connector wire allows the control housing to be mounted anywhere within 16’ of either end of the operator rail (operator controls required to be a minimum of 5’ from a moving door for safety). Sommer’s Pro+ Operator provides a versatile upgrade and more options for installation to their Evo+ line of operators. Pro+ operators are compatible with all Evo+ accessories and have options for installations with limited backroom where Evo+ operators do not have room to install. The Pro+ can be used as a side mount operator and can be installed anywhere within 16-feet of the garage door rail for installations that do not have a power supply directly on the ceiling. The Pro+ has a sleek, clean look with only the rail mounted to the ceiling. This simplified design is popular in specialty installations such as counter-top doors, art studios, event venues, and more. Security and Safety:
  • 922.5 MHz radio controls with 128-bit encryption
  • Positive push-back by the operator in case of attempted forced entry
  • Optional buzzer and lock for additional security
  • Continuously adjusted force curves for maximum safety and obstacle detection
  • Operators adjust speed based on door balance and weight for optimal speed and safety
  • Monitored optical safety sensors included
  • Optional monitored safety edge can be added
Features:
  • 4-channel on board radio receiver for optional functions with 40-slot on board memory
  • Engineered to 125,000 cycles in beta stage with third-party certification
  • Mid-stop and automatic closing enabled
  • Interlock capable
  • 600 Newton Motor - Speeds up to 9.4” per second - maximum door weight 600 lbs
  • Monitored safety edge or optical safety edge capable
  • Alternate timing for internal and external lighting with radio channel 2
  • 12VDC power supply at the motor carriage and 24VDC power supply at the control housing
  • Homelink compatible
  • Mount the control housing anywhere a power outlet is available
  • The 24V connector wire between the control housing and rail is a low voltage wiring making for an easier installation (no electrician required)
Included in operator package:
  • Motor Carriage
  • Control housing with built-in wall controls
  • 16’ connector wire
  • 3-piece rail for doors up to 8' tall
  • Nickel-plated chain
  • One 4-button remote with visor clip
  • Wired safety sensors
  • Hardware for installation including door arm, ceiling bracket and straps
  • Manuals and low voltage wiring kit

pro-brochure.pdf