- Usually Ships 4 to 7 Business Days
Sommer
Sommer YS10255-00001 2110 PRO+ 1-1/4HP Operator
- Usually Ships 4 to 7 Business Days
- availability:
- available
The Sommer Pro+ 2110 Operator from North Shore Commercial Door is a versatile garage door opener for doors weighing up to 1,500 pounds. Sommer Pro+ operators use a direct drive design with a traveling motor that glides silently on a fixed chain. Direct Drive operator technology maximizes strength while minimizing moving parts and operator noise/vibration. The Pro+ 2110 has an 1100 Newton or 1.25 HP equivalent motor that moves at up to 7” per second.
This Sommer Operator uses a flexible separate control housing that can be installed virtually anywhere in the garage (front, rear, or ceiling). Pro+ models are ideal for installations with limited backroom or where the building was not wired for a garage door operator ahead of time, since the connector wire allows the control housing to be mounted anywhere within 16’ of the operator rail (operator controls required to be a minimum of 5’ from a moving door for safety).
Sommer’s Pro+ Operator provides a versatile upgrade and more options for installation to their Evo+ line of operators. Pro+ operators are compatible with all Evo+ accessories and have options for installations with limited backroom where Evo+ operators do not have room to install. The Pro+ can be used as a side mount operator and can be installed anywhere within 16-feet of the garage door rail for installations that do not have a power supply directly on the ceiling. The Pro+ has a sleek, clean look with only the rail mounted to the ceiling. This simplified design is popular in specialty installations such as counter-top doors, art studios, event venues, and more.
Security and Safety:
- 922.5 MHz radio controls with 128-bit encryption
- Positive push-back by the operator in case of attempted forced entry
- Optional buzzer and lock for additional security
- Continuously adjusted force curves for maximum safety and obstacle detection
- Operators adjust speed based on door balance and weight for optimal speed and safety
- Monitored optical safety sensors included
- Optional monitored safety edge can be added
- 4-channel on board radio receiver for optional functions with 40-slot on board memory
- Engineered to 125,000 cycles in beta stage with third-party certification
- Mid-stop and automatic closing enabled
- Interlock capable
- 1100 Newton Motor - Speeds up to 7” per second - maximum door weight 1,500 lbs
- Monitored safety edge or optical safety edge capable
- Alternate timing for internal and external lighting with radio channel 2
- 12VDC power supply at the motor carriage and 24VDC power supply at the control housing
- Homelink compatible
- Mount the control housing anywhere a power outlet is available
- The 24V connector wire between the control housing and rail is a low voltage wiring making for an easier installation (no electrician required)
