• Usually Ships 4 to 7 Business Days
BEA

SuperScan I 10SSTI42 by BEA Active Infrared Presence Sensor

SKU:
10SSTI42
  • Usually Ships 4 to 7 Business Days
availability:
available
MSRP: $262.10
$238.27
(You save $23.83 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

 

North Shore Commercial Door has the SuperScan I 10SSTI42 active infrared presence sensor by BEA. The SuperScan I 10SSTI42 is door mounted and uses triangulation to detect the presence of pedestrians which eliminates false detections caused by varying floor and environment conditions. The SuperScan I 10SSTI42 can be used with automatic swinging, revolving, folding and low energy doors. Use the SuperScan I 10SSTI42 individually or daisy chained with up to 9 slave modules. This flexibility allows the SuperScan I 10SSTI42 to be used on both narrow or wide doors. Each module detection zone can be angled independently to eliminate unwanted detection of guide rails or walls. Coupled with BEA's Bodyguard overhead presence sensor, the SuperScan I 10SSTI42 meets ANSI 156.10 standard relating to swing doors. Suggested use for 44" door leaf.

The SuperScan I 10SSTI42 Includes: 1 Master module per housing. Overall length is 42 in. end cap to end cap.

Product Highlights:

  • Product Number: 10SSTI42
  • Door mounted presence detector
  • Active infrared
  • For use with swinging, revolving, low energy, high performance and off doors
  • Master with up to 8 slaves monitored or up to 9 slaves non-monitored
  • Field cut housing to desired door widths
  • When coupled with BEA's Bodyguard overhead sensor, SuperScan meets ANSI 156.10 standard for swing doors
  • Relay hold time can be adjusted from .1 to 4.5 seconds
  • Unit can be set to background analysis mode to reduce the chance of non-detection from faulty environment situations
  • Suggested use for 44" door leaf

Technical Information:

  • Technology: Focused Active Infrared
  • Detection Mode: Presence
  • Measurement of Distance: Triangulation
  • Supply Voltage: 12 to 24 VAC ± 10% / 12 to 24 VDC + 10%
  • Detection Range: 0 in. to 96 in. (0 ft. to 8 ft.)
  • Detection Signal Duration: Infinite Presence Detection
  • Output: Single Relay
    • Maximum Contact Rating: 1 A @ 30 V (resistive)
    • Hold Time: 0.1 to 4.5 Seconds
  • LED Indications:
    • Master: Red LED = Detection
    • Green LED = Active Output
    • Slave: Red LED = Detection
  • Operating Temperature Range: -30˚ F to 140˚ F
  • PCB Dimensions:
    • Master: 10.91 in x 1.5 in
    • Slave: 8.75 in x 1.5 in
  • Max. Number of Slaves:
    • Standard: 9
    • With Monitoring: 8 max.
  • Function Selections:
    • Detection Mode - NO or NC
    • Normal Mode or Background Analysis Mode
  • Response Time: < 50 ms
  • Material: Aluminum, ABS plastic / acrylic
  • Housing Color: Black
  • Degree of Protection: IP54

SUPERSCAN-CUT.pdf

BEA-SuperScan-Manual.pdf