SuperScan I Active Infrared Sensor BEA 10SSI40

North Shore Commercial Door now carries the SuperScan I 10SSTI40 door mounted active infrared presence sensor by BEA. The SuperScan I 10SSTI40 is a door mounted active infrared presence sensor that uses triangulation to detect the presence of pedestrians. This eliminates false detection caused by varying floor and environment conditions. The SuperScan I 10SSTI40 is designed for use on automatic swinging, revolving, folding and low energy doors. The module can be used as an individual unit or daisy chained with up to 9 slave modules. This flexibility allows the SuperScan I 10SSTI40 to be used on both narrow or wide doors. To eliminate unwanted detection of guide rails or walls, each module detection zone can be angled independently. Coupled with BEA's Bodyguard overhead presence sensor, the SuperScan I 10SSTI40 meets ANSI 156.10 standard relating to swing doors. Suggested use for 42" door leaf.

The SuperScan I 10SSI40 Includes: 1 Master module per housing. Overall length is 40 in. end cap to end cap.

Product Highlights:

• Product Number: 10SSTI40
• Door mounted presence detector
• Active infrared
• For use with swinging, revolving, low energy, high performance and off doors
• Master with up to 8 slaves monitored or up to 9 slaves non-monitored
• Field cut housing to desired door widths
• When coupled with BEA's Bodyguard overhead sensor, SuperScan meets ANSI 156.10 standard for swing doors
• Relay hold time can be adjusted from .1 to 4.5 seconds
• Unit can be set to background analysis mode to reduce the chance of non-detection from faulty environment situations
• Suggested use for 42" door leaf

Technical Information:

• Technology: Focused Active Infrared

• Detection Mode: Presence

• Measurement of Distance: Triangulation

• Supply Voltage: 12 to 24 VAC ± 10% / 12 to 24 VDC + 10%

• Detection Range: 0 in. to 96 in. (0 ft. to 8 ft.)

• Detection Signal Duration: Infinite Presence Detection

• Output: Single Relay
  • Maximum Contact Rating: 1 A @ 30 V (resistive)
  • Hold Time: 0.1 to 4.5 Seconds

• LED Indications:
  • Master: Red LED = Detection
  • Green LED = Active Output
  • Slave: Red LED = Detection

• Operating Temperature Range: -30˚ F to 140˚ F

• PCB Dimensions:
  • Master: 10.91 in x 1.5 in
  • Slave: 8.75 in x 1.5 in

• Max. Number of Slaves:
  • Standard: 9
  • With Monitoring: 8 max.

• Function Selections:
  • Detection Mode - NO or NC
  • Normal Mode or Background Analysis Mode

• Response Time: < 50 ms

• Material: Aluminum, ABS plastic / acrylic

• Housing Color: Black

• Degree of Protection: IP54