• Usually Ships 4 to 7 Business Days
Transmitter Solutions

Dolphin Saw Stand Alone Card Reader DOLCSAW1000H

SKU:
DOLCSAW1000H
  • Usually Ships 4 to 7 Business Days
availability:
available
MSRP: $245.96
$223.60
(You save $22.36 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

The Transmitter Solutions DOLCSAW1000H stand-alone proximity reader/keypad from North Shore Commercial Door includes a remote control transmitter for controlling access through a single door or gate. This is a Transmitter Solutions Dolphin Access System proximity card reader, which allows the keypad to "read" an entry card without the card being inserted into the reader. This smart-card proximity reader has a built-in relay pulse. You can program individual cards, and block or delete card access for up to 1,000 users.

This stand-alone waterproof IP66(NEMA 4)-rated card reader can operate with a 12 or 24 VAC/DC power sources. The reader recognizes HID and EM cards. The reader has an integrated alarm with buzzer. The read range is 2 cm. to 6 cm. Your stand-alone card reader includes an infrared remote control, an IN4004 diode and two add/delete master cards for site managers. Also included with this card reader kit are two wall anchors, two self-tapping screws, and a screwdriver.

PRODUCT HIGHLIGHTS:

  • DOLCSAW1000H
  • Stand-alone proximity card reader for single door/gate
  • Can handle up to 1,000 user cards (998 regular + 2 master)
  • ABS shell housing
  • IP66 (NEMA 4) rated
  • 12 or 24 VAC/DC
  • Recognizes HIC and EM facility access cards
  • Integrated alarm, buzzer
  • Reader range: 2-6 cm.
  • Includes infrared remote control
  • Includes 2 add/delete master cards
  • Comes with 2 wall anchors, 2 self-tapping screws, screwdriver
  • Operating temperature range: -40°F to 140°F
  • Dimensions: 4 3/4 in. L x 1 7/8 in. W x 3/4 in. D
  • Weight: 5 3/4 oz.
  • Built-in relay
  • Pulse or toggle mode
  • Waterproof, IP 66 rated

WHAT'S INCLUDED

  • DOLCSAW1000H
  • Master Cards (2)
  • Infrared Remote Control
  • Diode IN4004
  • Wall Anchors (2)
  • Self Tapping Screws (2)
  • Screw Driver

DOLCSAW1000-CUTSHEET.pdf

DOLCSAW1000H-GUIDE.pdf