• Crucial safety-device regulator; straightforward design and hook-up
  • Usually Ships 4 to 7 Business Days
USAutomatic

USAUTOMATIC 500015 MONITORED ENTRAPMENT DEVICE EXPANSION MODULE

SKU:
500015
  • Crucial safety-device regulator; straightforward design and hook-up
  • Usually Ships 4 to 7 Business Days
availability:
available
MSRP: $291.72
$265.20
(You save $26.52 )
Adding to cart… The item has been added
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.
USAutomatic 500015 Entrapment Device Command Module | USAutomatic 500015 Entrapment Device Command Module is a control system for entrapment-detection sensors and photo-eyes. Used for US Automatic Swing Gate Operators. Controls and regulates power from mother board and communicates safety device readings to operator. Mini-socket terminals with flat-head screw tightening: no winding wires around wobbly screws. Can be used for 8.2K or 10K resistors/sensing edges and N/C (Normally Closed) Photo Eyes. Get safety items and all the hook-ups from North Shore Commercial Door. Binary DIP-switch programming. For a gate operator to be UL 325 compliant, two active entrapment devices must be live and working for each direction of movement of the swing (outward and inward). This module can help meet this requirement.. For use with the
  • USAutomatic Ranger HD Swing Gate Operator SINGLE
  • US Automatic Ranger HD Swing Gate Operator DUAL
  • Patriot I - AC or SOLAR Charged SINGLE Swing Gate Operator w/LCR Radio Controls - by USAutomatic
  • Patriot II - AC or SOLAR Charged DUAL Swing Gate Operator w/LCR Radio Controls - by USAutomatic
  • Ranger 500 Series Swing Gate Operator w/LCR Radio Controls by USAutomatic
  • . PRODUCT HIGHLIGHTS | SPECS | TECHS
    • Safety-elements electrical and function regulating module can accept up to 9 entrapment devices total
    • Up to (5) contact edges 8.2 or 10K
    • Up to (4) safety eyes
    • Supply Voltage: +12 or +24 Vdc
    • Standby Current avg: 2 ma
    • Rocker-style binary DIP-switch programming for install and gate wiring
    • Module is needed for addition of secondary contact edge or set of photo eyes to operator
    • Compatible for monitored N/C Photo Eyes and 8.2 or 10K Contact Edges

    500015--MANUAL.pdf